
Epotec W2 is a bi-component solvent-free epoxy floor coating designed to achieve highly mechanically and chemically resistant and easy-to-clean surface finishes.
Epotec W2 is designed for completing the material surface and as a coating for concrete, the Monile® and Acrile® flooring, and for plasters. It adheres well to a number of foundations, e.g. to wood, steel, and concrete.
hydrochloric acid 20 %
sulphuric acid 50 %
citric acid 30 %
acetic acid 5 %
acetone
methanol
saccharine syrups
sodium hydroxide
petrol
oil
detergents
Excellent resistance: unaffected even after long-term contact Good resistance: unaffected after 1 month of contact – then a change in the surface; results of others tests not available Limited resistance: resists for 2 - 3 hours, then permanent damage.
Epotec W2 meets the requirements specified in Government Regulation 163/2002 Coll. The material has been tested and certified by competent authorities. A Certificate issued by an authorized person confirms the quality of the material. Products placed on the market are compliant with the technical specifications.
The following documents concerning Epotec W2 are available:
| Tensile strength | 12 MPa |
| Adhesion | > tensile fracture of concrete |
| Pot life (at 20 °C) | 30 minutes |
| Set to light foot traffic (at 20 °C) | 12 hrs |
| Hardening (at 20 °C) | after 7 dnech |
| Package yield | approx. 45 m2 |
| Non-sticking to the touch (at 20 °C) | after 4 hrs |
| Light operation (at 20 °C) | after 24 hrs |
| Full operation (at 20 °C) | after 48 hrs |



Introduction |
About Us |
Areas Of Application |
Types Of Floors |
Products |
References |
Contact
Company: TECHFLOOR S. R. O., Company offices: Roztoky, 17.Listopadu 454, Zip Code 252 63,
ID No.: 253 50 650, Date of record: May 14, 1996
All rights reserved Techfloor