MONILE

Monile® is an exceptionally high-quality flooring of high premium technical parameters, suitable for the reconstruction of existing surfaces and for constructing new flooring systems. Reconstruction technology enables the restoration of floors with large defects (fissures, cracks, pot-holes, and height irregularities).

Advantages

• high compression and tensile strength
• excellent technical parameters
• high abrasion resistance
• possible to reconstruct even severely damaged floors
• o need for ground moisture insulation, unless prescribed in the project
• possibility of laying on fresh concrete after 6 days, including shot-blasting
• possibility of re-profiling (sealing) an uneven surface in one layer, without any hazardous inter-layers, up to a thickness of 5-6 cm
• continuous monitoring of the vertical alignment of the new floor during its laying and re-profiling
• possible to apply on a wet foundation in wet operations
• high resistance to dynamic load and the impacts of heavy objects
• high resistance to temperature jumps
• absolutely dust-free surface
• minimum sensitivity to weather conditions and temperature jumps
• absolute non-flammability
• absolutely no hygienic risks
• high chemical resistance (urea, blood)
• oil-tightness, water-tightness
• anti-skid
• high adhesion to the foundation
• possibility of constructing coves
• very long service life
• colourfastness and unified colour design
• possibility to separate the production and communication areas with different colours
• easy maintenance
• daily productivity of laying – 150-200 m² including the coves
• setting to light foot traffic depends on weather conditions (temperature) - approx. 24 hours from the laying
• full chemical resistance (even water load) after approx. 5 - 7 days

Use

• meat-processing plants
• storage areas
• breweries
• engineering production
• cooling boxes
• medium to high load facilities
• external ramps

Certificates

The following documents concerning Monile® are available:

• Certificate C-99–0412/A/Z issued by CSI a. s. Zlín,
• Declaration of Conformity issued pursuant to Article 12, Paragraph 2 of Act 22/1997 Coll., and pursuant to Article 5 of Government Regulation 163/2002 Coll.,
• Construction Technical Certificate STO-99–0575/A/Z issued by CSI a. s.,
• Statement on the health safety of the product, issued by the National Institute of Public Health,
• Reports 10556 and 8176 on tests of fire technical characteristics, issued by CSI a. s. Prague,
• Determination of natural radionuclide content – VÚSH Brno, a. s. (Research Institute of Building Materials),
• Test Report 190–003–062 issued by CSI a. s. Zlín

Surface finish variants

Monile® Standard

A basic anti-skid finish in several surface variants depending on the selected foundation technology and the filling fraction used.

Monile® Fine

Monile flooring with a lower filling fraction and aggregate, final surface finish with a significantly smoother surface structure, without protective varnish or other final coating and penetration systems.

Monile® Plus

Surface finish with a water-soluble epoxy varnish, offering the best aesthetic look, the simplest maintenance and an almost smooth surface finish with a guaranteed anti-skid quality.

Monile® QS

The flooring surface consists of a thin-layer compound epoxy solvent-free resin containing fine silica sands.

Monile® Antislip

Surface with strong anti-skid qualities, to be used for external ramps, loading down platforms, etc.

Monile® S-Finish

Final surface finish applied with a heavy duty epoxy varnish for chemically stressed structures.

Solution for construction and expansion joints

The solution and design of dilatation units follows the existing grid of the foundation expansion joints and the position of active joints and cracks. It is also possible, while constructing the new structure of the floor, to lead the expansions through the concrete slab and Monile® (using diamond technology and following the grid of the modular network of the building). Finally, the character of the structure under construction is taken into consideration. This technology eliminates cracks in the floor surface thanks to the precise covering of expansions in the concrete slab and in the upper synthetic floor Monile®.

Owing to the fact that the thickness of **Monile® **is 10 mm or more, the floor is able to distribute the load and transfer it to the concrete slab on a significantly smaller scale, so that the slab carries a much smaller load than the floor surface. This huge advantage leads to a significantly higher service life of the floor and to a successful reconstruction of even those concretes whose strength equals 15 – 20 MPa

Technical parameters